6.Four-corner 360-degree plastic storage pulley movement design: The durable kitchen storage pulley wheel has a good mechanical labor-saving design, which can easily move the shelf. Balanced and stable sliding to any place you want, plastic storage trolley wheels can be competent whether it is wooden floor, tiled floor, concrete floor, etc .... without harming the floor surface.

We only need to have a mold for two-color PVC strap for flip-flops and one 280T two-color injection molding machine. Focare Mold can provide you maximum 16 + 16 cavity two-color strap mold, if you are interested in making two-color PVC strap for flip-flops, please contact us.

What are the benefits of plastic furniture? 1. Plastic furniture is often more affordable than other options including wood and metal. 2. Plastic furniture is lightweight and easy to move around and rearrange. 3. Plastic furniture is mostly unbreakable; it won’t be damage with dropping. 4. Wooden furniture can develop cracks and require refinishing 5. Plastic furniture is available for variety of colors. 6. Plastic furniture is waterproof; it is the best option in rain. Plastic won’t be rust or cracked. ​

The plastic foldable stool is composed of the stool surface and the stool legs. The connection between the stool surface and the stool legs is hinged. The lower part of the stool surface is concave, the lower part of the two stool legs is M-shaped or similar to M-shaped, and the concave part of the two stool legs and the middle part of the bottom surface of the stool surface are hinged by two connecting rods. The utility model has the advantages that the stool legs can be folded into the stool surface and viewed from the outside, which is only a stool surface and is very convenient to carry. In addition, the utility model has the advantages of reasonable structure, good mechanical properties and low price.

For this type of airtight food container, there are buckles on the side to ensure the tightness and prevent the leakage. Some buckles are made separately, however we made the two-color lid and buckles as one-piece. Therefore, a two-color lid and a body are one complete set, which makes product be lighter and simple. The weight of lid is 33g (25.5g for PP, 7.5g for TPE), and the body is 34g (33.3g for PP, 0.7g for TPE). On the other hand, producers can avoid on purchasing mould for buckles, which can save time and cost.

Refrigerator drawer belongs to large-scale production plastic mold and requires high standard, so single cavity injection molding process and point gate hot runner are used in injection molding. For the parting surface of the drawer, it determines the structural form of the whole mold, so this design adopts the injection mode of the double parting surface to achieve the stability of the whole refrigerator drawer structure.

The bowl made of this PP + TPE material has the following advantages: 1. Folding design, easy to go out. 2. Non-toxic plastic, safe, durable and easy to clean. 3. Hanging buckle design, can be hung on the cage or pet stroller. 4. Bottle hanging design, which can be installed on the water bottle to make the dog eat better.

There are several methods to test plastic paint buckets: 1. Airtightness test: After assembling the matching lid to fill the plastic paint bucket with 80% of water, the bucket should be dumped. The lid should not fall off or leak. 2. Push-down test: After assembling the matching lid to fill the plastic paint bucket with 80% of water, stack three buckets together, tilt them and let the buckets fall; the bucket lid cannot be opened. 3. Drop test: After assembling the matching lid to fill the plastic paint bucket with 80% of water, drop it at an inclined angle of 45 ° at the bottom of the bucket at a height of 80cm. The lid cannot be separated from the bucket, and the bottom of the bucket must not be broken. 4. Special test: After assembling the matching lid to fill the bucket with 80% of water, stack 4 buckets without deformation for 7 days. 5. Side leak test: Fill the bucket with 80% of water and leave to stand for 30 minutes without leakage; turn to the opposite side for 30 minutes without leakage.

The whole structure has the following advantages: 1. The rigidity of molding products is good. 2. mold is easy to be assembled and disassembled. 3. The number of mold parts is small. 4. There are few parting marks on the surface of the product. 5. The external dimension of the mold can be reduced. ​