Two color 2k sport water bottle cap mold Product Material: PP+TPE Mold Cavity : 2+2 Mold Steel: 2344 Mold dimension: 900 X 610 X 450 mm Mold size: 1437 kg Suggested machine: 250 tons two color rotary table injection machine

The general water bottles are round and sometimes take space in the bags, but these water bottles are square. If they are placed properly, they can save a lot of space inside your bag.

Spray cap molds are used in the molds for producing insecticide shells. They are made in accordance with the shape of the insecticide cover required. They are injection molded with plastic and processed into insecticide shell parts through various processes. The principle of the spray tank is that the liquid is pressed out of the valve by using air pressure. The liquid can be sprayed evenly. The direction and dose can be controlled. Any content can be easily put in and easy to use.

Most of the plastic flip top caps mould are designed with two-time ejection structure. The core is pushed out two times. The stripper plate and the ejector sleeve in the middle of the product are pushed out together to 14mm, and then the stripper plate push out continually until the flip top caps drops.

Cap size: ø90.7 X 93 X 25mm Cap weight: 36gm Material: HDPE Mold: 4 cavities The thread part of this cap is designed with thread rotation off, and the motor device is used to drive the gear to rotate. The cap must be designed with a stop device to prevent the product from following the rotation when the thread rotates, resulting in the scratch of the cap thread. After the thread part of the cap is separated, use the ejector plate to eject. Compared with thread strength and thread rotation, thread rotation is more difficult to make, which requires high-precision processing equipment, high installation accuracy and accurate positioning between plates, otherwise it is easy to cause the problem of parts stuck and motor or oil cylinder not moving.

Each cavity of this cap mold is designed with separate inserts, so that each cavity product in the process of injection molding maintain the same injection molding pressure, clamping force and other molding conditions, so that the product quality is more stable and reliable. Moreover, the independent insert design can make the life of the mold longer. If there is any problem with the parts, the parts can be directly replaced without affecting the production schedule.

The unscrewing device of this cap mold is hydraulic motor. The ejecting sequence of this cap mold is to let the upper press plate open the mold first, and rely on the I-shaped block to drive the cavity slider to slide away. The mold is opened to a certain stroke, and the caps will be unscrewed by hydraulic unscrewing motor. The left and right thimble plates are performed simultaneously. The spring is pushed out of the barrel by the force of the spring, so that the product is firmly in the core part. After opening the mold, the oil cylinder pushes the rack, drives the central drive shaft, drives 4 product threaded shafts backward to disengage the product, and then relies on the 2 ejector rods on the outside of the machine, and the ejection plate pushes caps off from mold.

Flip top shampoo cap is one-time use of large-scale production product. Normally, after injecting, there is no more surfaces processing, and it can directly enter the subsequent automatic packaging. Therefore, the appearance of the flip top shampoo cap is required to be high, and there are no obvious molding defects.

Plastic liquor caps are different from the ones we usually use. They are not sealed by threads or barbs like plastic caps of mineral water bottles, but by oak plugs. However, the oak plugs may cause decay or cracking after long-term and long-distance transportation or weather, plastic caps are needed to keep them sealed and protect oak plugs.