Two-Color Peeler Plastic Injection Mould Mold cavity：2+2 cavity Mold main material：718H Mold size：870 X 630 X 516mm Suitable machine：280ton two component injection mold machine The core of two-color peeler plastic injection mould is made inserted, which can be replaced for different design. As the result of product being short, we design the products be injected horizontally that allow product to have lesser parting line and ejector mark.

The plastic weaving rattan baskets are multifunctional for bathroom shower storage basket, debris storage organizer and so on. It is made of durable woven plastic, outside like rattan weave, inside is smooth, premium quality flexible construction, no sharping edge. Little cut-out ear handles for easy carrying or transport or pulling out. Perforated pattern allows for ventilation, good storage solution for office, bedroom, closet, bathroom counter top, etc. Lightweight and easy to clean, just wipe clean with damp cloth. With an elegant and classy appearance, also making great gift ideas.

The characteristic of this kind of multi-color injection moulding is to transform the general single color product into a multi-color mixed product without changing the mould, making them like various grain patterns such as wood grain, marble, jadeite and so on, without having to go through two processing procedures such as spray painting and water dyeing.

Industrial safety helmets are widely used on building and workshop to protect the head from injury due to falling objects, impact with other objects, debris, rain, and electric shock. For making plastic industrial safety helmets, PC or ABS plastic material are the best selection which has the best impact resistance, light weight, high toughness, less fracture, and easy processing.

For this juice mixer mold, the most important point is the high-end polish. The mold should be polished carefully to reach high transparency. As there are two big sliders to form the part, the parting line on the handle part is important, too. The parting line should be as less as possible to avoid flash and cutting customers’ fingers while using.

This straw handle cup is divided into two sets of molds, one is the cup body and the other is the cup cover. In design, the cup body cavity 2 spring block slides. When opening the mold, it depends on the pull hook on the mold core side to start in an instant, and then the spring pushes the spring block out, and the mold core side directly relies on the machine to push the ejector plate to eject the product and drop. When the cup cover is opened, slide the 2 sliding blocks on one side of the core to both sides through the inclined guide post to separate the sliding blocks from the product. The 2 sliding blocks are designed on the pusher plate to eject the product as a whole.

DISH RACK 16 HOLES Product Size: 489 x 489 x 100mm Mold Design: 1. Cavity and Core made by splicing inserts 2. High-efficiency cooling system 3. 4 sliders design for Core with oil cylinders 4. Runner Gate with 5 tips Hot Runner to Submarine Gate

Cap size: ø90.7 X 93 X 25mm Cap weight: 36gm Material: HDPE Mold: 4 cavities The thread part of this cap is designed with thread rotation off, and the motor device is used to drive the gear to rotate. The cap must be designed with a stop device to prevent the product from following the rotation when the thread rotates, resulting in the scratch of the cap thread. After the thread part of the cap is separated, use the ejector plate to eject. Compared with thread strength and thread rotation, thread rotation is more difficult to make, which requires high-precision processing equipment, high installation accuracy and accurate positioning between plates, otherwise it is easy to cause the problem of parts stuck and motor or oil cylinder not moving.

The bathroom corner shelf is well-designed. The shape is triangle, which is appropriate to assemble in the corner. It has three spaces and two covers. For the first compartment it is out of cover, which is suitable for the waterproof commodity such as toothbrush set and shampoo whose size is taller. For the second compartment, you are suggested to put toilet paper and sanitary product into for preventing them from wet. As to the last also the smallest compartment, it is the best place to keep soap inside. At the bottom of the shelf has three hooks, you can hang towels, bath ball or anything you need in your bathroom.