The advantages of plastic dish rack are: 1.     Plastic dish rack is lighter than other material, such as metal one.  In this way, the plastic dish rack is easy to move to any place we want. 2.     Plastic dish rack can prevent rust, even if it is soaked in water for a long time, it will not oxidize which is much better than metal dish rack. 3.     The plastic dish rack is made of high-quality PP which is environmental protection material.  The material is soft and not easy to be broken. 4.     The plastic dish rack has hollow design which is easy to drain and air dry the dishes and not easy to breed mildew. 5.     The plastic dish rack has non-slip and wear-resistant design in the bottom of the rack.  Although if the tabletop is wet, the rack will not slide easily.

There are two ways to manufacture two-color non-slip hanger, by over-molding or bi-injection. Over-molding is simpler; however, it needs two plastic injection molds and two plastic injection machines, which takes more time and extra cost for labor. Bi-injection needs only one two-color plastic injection mold and one two-color plastic injection machine, it saves a lot manufacturing time and decreases the deformity of product drastically that helps avoid material waste.

It is easy to install and use the two-color baby ass washing basin in one step. Its design is to help parents to save effort.  The snap-on suction cups are easy to install.  First make sure that the suction cups hold the washbasin firmly, and then place the baby in a supine position and wash it in the center.  Please don’t leave your baby during the process. The two-color baby ass washing basin help you care for the baby to grow up better.

How to install the hole plate shelf? First step, install the adhesive on the four corners of the hole plate. Second, align it with the blank surface of the wall, paste and press it firmly.  Third, assemble the feet and the shelf board, and then put stuffs after 24 hours.

The two-color handle stool is made of healthy PP material which is good in toughness.  The stool structure is thickened, stable, and not easy to break.  The two-color handle stool is durable and can bear up to 100 kgs. The reinforced rib design on the bottom of the two-color handle stool makes the stool stronger and more durable.  The four stool feet have a non-slip pad design, which is non-slip and wear-resistant, which protects the floor and reduces wear and tear.

The two-color collapsible foot bath bucket is made of PP+TPE, which make the bucket not only foldable, but also mixed colors. The bucket looks more attractive to everyone than an ordinary plastic bucket. We only need to fold one side first, and then fold the other side; the height of the bucket is only 7 cm after folding. This size makes the two-color collapsible foot bath bucket is easy to be storage after folding.  The bucket can be placed freely in any corner.  With the notch design in the bottom, the bucket can be hung on the wall to save space after folding.

The two-color square basin is made of PP+TPE.  The raw material PP is strong enough and let the basin has a very good support when it is filled with water.  The raw material TPE is soft and let the two-color square basin be foldable.  The two-color square basin is foldable and retractable freely. It is thin and light without taking up space.  It is suitable for home and outdoor use.  As the height of the two-color square basin is only 5.5 cm after folding, one can put it inside any size of luggage case. So, we don’t need to care about if the washbasin in the hotel is clean or not, just put a two-color square basin in the suitcase and we can easily use it in the hotel.

The two-color toothbrush handles mold can realize the mixing processing of two kinds of plastic raw materials in a set of mold. After two times of molding respectively and then mixing together, the product with two kinds of raw material characteristics can be obtained. The products produced by the two-color toothbrush handles mould are more beautiful in appearance than the ordinary toothbrushes. We can greatly reduce product deformation, production time and production cost by using two-color injection technology. The handle of the two-color toothbrush is made of PP and TPE; it not only maintains the characteristics of firmness and durability, but also increases the soft and comfortable feeling.

To make a two-color foldable trash can that can fold and expand smoothly, the control of TPE part thickness is the key point. And to ensure the high efficiency of production, the cooling system needs especially design. Focare Mould, we are a team who specializes in making two-color plastic injection mold. We provide one-stop service, from product design to the mold test. Equipped with good CNC and injection machines, plus the technique and experience, we can help you to expand your business.